Missing nuts and bolts caused last year's deadly construction elevator accident in Sweden

Your support helps us to tell the story

Support Now

Find out moreClose

As your White House correspondent, I ask the tough questions and seek the answers that matter.

Your support enables me to be in the room, pressing for transparency and accountability. Without your contributions, we wouldn't have the resources to challenge those in power.

Your donation makes it possible for us to keep doing this important work, keeping you informed every step of the way to the November election

Andrew Feinberg

White House Correspondent

A construction elevator that killed five people when it collapsed last year in Stockholm was missing the bolts that were supposed to hold its mast together, authorities said Wednesday.

The deadly crash “was caused by failure to perform relevant safety inspections of the hoist assembly,” the Swedish Accident Investigation Authority said.

In the December 2023 accident, the elevator plummeted 20 meters (66 feet) with five people inside, during work on a 14-story building the Stockholm suburb of Sundbyberg.

The agency said its probe had showed that five of the nut and bolt assemblies required to hold sections of the elevator's mast together were missing, leaving the shaft standing only because of friction between its sections.

Before the accident, the mast was extended to the ninth floor. The assemblies “likely” were already missing, the report said.

“The accident occurred when the load on the mast ... became greater than the structure could hold, leading to the mast sections separating and the hoist car falling to the ground,” the authority wrote.

It has not yet been decided whether to press any criminal charges and it was not known when a decision could be made. The public prosecutor’s office is still investigating the incident for possible work environment violations.